Commercial & Shop Floor Epoxy in Bend, OR

Commercial & shop floor epoxy is a heavier build than a home garage system. The floors take forklifts, pallet jacks, rolling tool carts, dropped parts and spilled chemicals. Bend has a lot of these spaces. Wikipedia counts over 30 breweries and four hard cider companies in the city as of 2024, and every one of them has wet production floors. Add light industrial buildings, auto and RV service bays, cabinet and fabrication shops, food businesses and the large shops on acreage around Tumalo, Alfalfa and Powell Butte.

What changes on a commercial floor

• Thickness: we use 100% solids epoxy built thicker than a typical garage coating, sometimes with aggregate in the build.
• Chemical resistance: the topcoat is matched to what will hit the floor, from fuel and brake fluid to cleaning agents and sugary wort.
• Texture: wet floors and greasy floors need different levels of grip, and we set it by zone.
• Joints and drains: control joints, trench drains and floor sinks are detailed so water and liquids go where they should.

Breweries, food and beverage spaces

Production floors in breweries, cideries, kitchens and food plants see hot water, caustic and acid cleaners, sugars and constant washdown. Standard garage coatings are not built for that. These floors call for heavier systems with chemical-resistant topcoats and slip-resistant texture, sloped toward the drains. Any floor that needs to meet a health or food-safety inspection should be checked against that inspector's requirements before the system is chosen. We plan the system with you around what you clean with and how often.

Shops and service bays

Auto, RV, equipment and fabrication shops need resistance to oil, fuel and hydraulic fluid, plus impact resistance where parts and tools get dropped. A light-colored floor also bounces light around a shop and makes small parts easier to find. We can paint safety lines, walkways and bay markings in the coating.

Scheduling around your business

A closed floor costs money. We plan work in phases, after hours or on weekends where we can, and we pick systems with cure times that fit your shutdown window. HomeGuide puts polyaspartic's full cure at about 24 to 48 hours, compared with up to a week for standard epoxy, so faster-curing products are often worth their price on a commercial job.

Home shops and outbuildings

Many Central Oregon properties have a big detached shop, an RV garage or a barn with a concrete floor. Those often benefit from a commercial-grade build, especially if you work on vehicles or park heavy equipment inside. We price them the same way: by size, slab condition and the system that suits the use.